• Single belt head machines
• Light duty, intermittent operation
• For jobbing shops or work cells
• 225 and 600mm working widths, dry
• 225mm working width wet
• Variable throughfeed speed
• Powered table set, digital readout and load meter on 600mm
• Scratch grain finishes with abrasive belt
• Satin grain finish with nylon web belts
• 127mm (on 225mm) and 205mm (on 600mm) minimum component length
• Dryer and filter on wet machines

• Magnetic table
• Different hardness contact rollers

• Second abrasive belt head

• For deburring punched, nibbled, sheared or laser-cut sheet metal parts.
• For calibrating or keying carbon, rubber, wood or other soft materials.
• For grain finishing any material.
• Centralised operator control panel.
• 900, 1100mm, 1350mm working widths
• Wide belt head with fine adjustments of contact roll, 150mm.
• Two speed main motor
• Conveyor bed on 4 heavy duty precision spindles, each 2 tons capacity.
• Ridged, precision made, rubber coated, workpiece hold down rolls.
• Motorised, single point thickness setting.
• Electronic digital thickness read-out.
• Frequency controlled feed motor with conveyor reverse for set-up.
• Dust extraction funnel(s).
• Enclosed heads and motors for minimising noise levels.
• Hour counter

• Brush head with fine adjustment (Brush 200mm) and brush oscillation.
• Steel wire, Stainless wire, Nylon web, Slashed abrasive brushes
• Extended opening to 300mm

• Belt only
• Belt + belt
• Belt + brush
• Brush + belt
• Belt + belt + brush
• Belt + belt + brush (slaggrinding specification)
• Belt + brush + brush

• For deburring punched, nibbled, sheared or laser-cut sheet metal parts.
• For calibrating or keying carbon, rubber, wood or other soft materials.
• For grain finishing any material.
• Centralised operator control panel.
• 600, 900, 1100, 1350mm working widths
• Wide belt head with fine adjustments of contact roll, 180mm.
• Conveyor bed on 4 heavy duty precision spindles, each 2 tons capacity.
• Ridged, precision made, rubber coated, workpiece hold down rolls.
• Motorised, single point thickness setting.
• Electronic digital thickness read-out.
• Frequency controlled feed motor with conveyor reverse for set-up.

• Orbital action abrasive pads
• Brush head with fine adjustment (Brush 200mm) with fast brush oscillation:
  • Steel wire brush (60 strokes/min.)
  • Nylon web brush (60 or 120 strokes/min)
  • Quick exchange brush slide complete with shaft and bearings.
• Two speed or Variable speed grinding motors.
• Fixed/floating conveyor table
• Constant pass line.
• Component cleaning brush.
• Reverse feed cycles with retractable heads.
• Stand-alone (in lieu of standard) parts dryer for wet-working machinery.
• Extended opening to 250mm.
• Vacuum table.

• Dust extraction funnel(s)
• Motors enclosed within machine frame

• Automatic coolant filtration system.
• Integral parts dryer (minimum component length 80mm).
• 3 sets of squeeze rolls.
• 2 sets of air knives.
• Noise insulated blower.
• Non-stainless machine components treated with rust preventative coatings.
• Quick exchange spray nozzle pipes for ease of maintenance.
• Centralised lubrication for high speed bearings.
• Each brush head includes a stainless steel wire brush, optionally, nylon web.

• 600mm & 900mm operating widths
• Main motor brakes
• Stainless Steel construction for:
• Wet operation with:
  • Built-in filtration plant
  • Built-in air knife dryer
• Constant Pass line
• Electronic Abrasive belt tracking
• Variable throughfeed speed (4.5-14m/min)
• Conveyor belt tracking
• Colour graphic control interface (HMI)
• Automatic lubrication to high speed bearings
• Digital thickness readout and
• Powered table set

• Built-in Brush head with
  • Brush Oscillation

• For deburring punched, nibbled, routered, laser-cut or sheared, sheet metal parts (with or without cladding removal).
• For calibrating or keying aluminium castings and other soft materials.
• For cleaning and grain finishing any material.
• For plasma and slag removal
• Available in 600, 900, 1100 and 1350mm working widths
• 1 to 5 Abrasive Belt, Brush and/or Disc heads.
• Wet or dry

Additional Specification for Precision Applications:

• Specific Surface Finish Generation, grained, brushed, sueded, smoothed.
• Accurate thickness Calibration
• Contact rollers / Brushes / Nylon Web discs / Orbital action abrasive pads / Platen heads as required.
• Hydraulically driven throughfeed conveyor
• Multiple, hard, compact, high speed rollers for stock removal
• 1 or 2 Large diameter brushes for edge deburring

• For deburring punched, nibbled, routered, laser-cut or sheared, sheet metal parts (with or without cladding removal).
• For calibrating or keying aluminium castings and other soft materials.
• For cleaning and grain finishing any material.
• For plasma and slag removal
• Available in 600, 900, 1100 and 1350mm working widths
• 1 to 5 Abrasive Belt, Brush and/or Disc heads.
• Wet or dry

• Aerospace Alclad deburring, without removing the cladding.
• Electromotive Punched, Lacquered Steel deburring, bottom working, without removing the coating.
• Fine Blanked component deburring without grinding.
• Patented, inagressive abrasive belt heads for removing excess vertical, punch or router burr with
• Abrasive belt air cushioning.
• Ajustable low contact pressure, low running speed (&/or)
• Special purpose nylon web brushes for quick radiusing (&/or)
• High speed rotating nylon web discs for controlled radiusing
• Very high throughfeed speeds for punched laminations (30-45m/min)
• And (as applicable)
  • Vacuum table for small parts
  • Wet working operation with built in filter and dryer
  • Bottom working

• For deburring punched, nibbled, routered, laser-cut or sheared, sheet metal parts (with or without cladding removal).
• For calibrating or keying aluminium castings and other soft materials.
• For cleaning and grain finishing any material.
• For plasma and slag removal
• Available in 600, 900, 1100 and 1350mm working widths
• 1 to 5 Abrasive Belt, Brush, Disc or Orbital brush heads.
• Wet or dry

• (Drill Burr, Oxy-, Plasma and Laser Slag Removal)
  • Pneumatic floating bed for distorted work
  • Hard, compact, high speed #1 head for slag removal
  • Flexible, sensitive, diamond pattern #2 head for contour following
  • 1 or 2 Large diameter brushes for edge dulling and derusting
  • Rotating orbital slashed abrasve brushes for generating radiusses
• (Oxide Removal)
  • Hard, compact, high speed #1 head for skin removal (&/or)
  • Medium, grooved, #2 head for standard grain finish (&/or)
  • Soft #3 head for fine finishes (&/or)
  • 1 or 2 Large diameter brushes for soft brushed finishes

• For deburring punched, blanked, nibbled, routered, laser-cut or sheared sheet metal parts (with or without cladding removal)
• For calibrating or keying aluminium castings and other soft materials.
• For cleaning and grain finishing any material.
• For plasma and slag removal
• Available in 600, 900, 1100 and 1350mm working widths
• 1 to 5 Abrasive Belt, Brush and/or Disc heads.

• Centralised operator control panel.
• Wide belt head with fine adjustments of contact roll, 180mm or  280mm.
• Brush head with fine adjustment (Brush 280mm).
• Fast brush oscillation.
  • Steel wire brush (80 strokes/min.)
  • Nylon web brush (60 or 120 strokes/min)
• Quick exchange brush slide complete with shaft and bearings.
• Conveyor bed on 4 heavy duty precision spindles, each 2 tons capacity.
• Ridged, precision made, rubber coated, workpiece hold down rolls.
• Motorised, single point thickness setting.
• Electronic digital thickness read-out.
• Frequency controlled feed motor with conveyor reverse for set-up.

• Pre-programmable execution settings for part thickness, abrasive belt head depth and brush or disc head depth.
• Multiple reciprocating cycles with pre-programmable stock removal and number of cycles
• Fixed/floating conveyor table
• Constant pass line.
• Component cleaning brush.
• Reverse feed cycles with retractable heads.
• Stand-alone parts dryer for wet-working machinery.
• Heavier / Multiple speed / Variable speed main motors.
• Magnetic / Vacuum conveyor table
• Digital feed speed readout

• Dust extraction funnel(s).
• Motors enclosed within machine frame

• Automatic coolant filtration system.
• Integral parts dryer (minimum length 80mm).
  • 3 sets of squeeze rolls.
  • 2 sets of air knives.
  • Noise insulated blower.
• Non-stainless machine components treated with rust preventative coatings.
• Quick exchange spray nozzle pipes for ease of maintenance.
• Centralised lubrication for high-speed bearings.
• Each brush head includes a stainless steel wire brush, optionally, nylon web.

• Available in 1350, 1600, 2150 and 2400mm working widths
• Single or Multiple abrasive belt heads.
• Wet or Dry Optional
• For grain and brush finishing of sheet, plate and coil
• For high accuracy calibrating or large area keying of rubber, plastics, cork and other soft materials.
• Centralised PLC driven Control Panel
• Powered, Remote adjustments of heads
• Worm and Gearbox driven Roller Table
• Case Hardened Steel Billy-Rollers
• Remotely monitored and Self-levelling Billy-Roller
• Solid Core Grinding Aggregates
• In-machine Grinding Roller dresser
• High dynamic balance for chatter-free finishing
• Very high precision and tolerance grinding
• Tailored to suite your requirements
• Fully integrated lines
• Full integration into your existing line

• Available in 900, 1350, 1600 and 2150mm working widths
• Single or Multiple Abrasive Belt or Brush heads.
• Wet or Dry Optional
• Centralised operator control panel.
• Wide belt head with fine adjustments of contact roll, 280 & 180mm.
• Brush head with fine adjustment (Brush 200mm).
• Brushing Machines with Very High Oscillation Rates (700 strokes/min)
• Quick exchange brush slide complete with shaft and bearings.
• Conveyor bed on 4 heavy duty precision spindles, each 2 tons capacity.
• Ridged, precision made, rubber coated, workpiece hold down rolls.
• Motorised, single point thickness setting.
• Electronic digital thickness read-out.
• Frequency controlled feed motor with conveyor reverse for set-up.

• Pre-programmable execution settings for part thickness, abrasive belt head depth and brush head depth.
• Multiple reciprocating cycles with pre-programmable stock removal and number of cycles
• Fixed/floating conveyor table
• Constant pass line.
• Component cleaning brush.
• Reverse feed cycles with retractable heads.
• Stand-alone parts dryer for wet-working machinery.
• Heavier main motors.
• Variable speed main motors
• Magnetic conveyor table
• Vacuum conveyor table
• Digital feed speed readout

• Dust extraction funnel(s).
• Enclosed heads and motors for minimising noise levels.

• Automatic coolant filtration system.
• Integral parts dryer
  • 3 sets of squeeze rolls.
  • 2 sets of air knives.
  • Noise insulated blower.
• Non-stainless machine components treated with rust preventative coatings.
• Quick exchange spray nozzle pipes for ease of maintenance.
• Centralised lubrication for high speed bearings.
• Each brush head includes a stainless steelwire brush, optionally, nylon web.

• Reciprocating Table Bed Sizes available to custom sizes
• Vacuum and/or Magnetic Clamping
• Single or Multiple abrasive belt heads
• Automatic Control of all parameters
• Creep feed for high stock removal
• Close tolerance thickness and flatness
• Low Ra finishing
• Machining mark free finish
• Quick change abrasive belt
• Wet operation
• High Volume flood coolant
• Stand-alone High-throughput filtration
• Drag conveyor and paper filter bed

• Single or twin abrasive belt aggregates
• Centralised control panel with Simatic S7 plc
• 4000mm or 6000mm working span variants
• 200mm vertical head movement.
• 600mm scissor lift table movement
• Scissor lift capacity 10,000kg or 16,000kg
• Variable abrasive belt speed 15-38m/sec
• Programmable, scanning pressure tool 6-30m/min
• Variable table travel speed 0.3-16m/min
• Bespoke design parameters

• For removal of rolling marks, scale, scratches and scrapes
• For Hot and Cold Rolled Sheet and Plate
• For difficult to pickle alloys e.g. Nickel or Molybdenum
• For consistent, controllable finishing
• Available in Worktable sizes of 3000 x 6, 9 or 12000mm
• 5000Kg table loading
• Centralised operator control
• Siemens plc controller
• Suspended, self-levelling contact rollers
• Variable stroke speed (6-30 m/min)
• 300mm wide grinding belts (2)
• Separate belt drives of 30kW each (2)
• Variable abrasive belt speed (5-18 m/sec)
• Scissor lift worktable (0.3-18 m/min)

• Tailor-made to your requirements

• For spot weld and seam weld dressing
• For repair grinding small fabrications
• For flat and shaped surfaces
• For minimising risk of “white finger”
• Available in worktable sizes of 800-1500mm depth x 2000-5000mm width
• Twin grinding belt drive (4 kW)
• Variable grinding belt speed (4-25 m/s)
• Main motor brake
• Independent pneumatic belt tensioning
• Movable abrasive belt guard
• Work area illumination
• Abrasive belt flexibility of between +100° and -100° (0° = horizontal)
• To take coated abrasives or nylon web belts

• Suspended, self-levelling contact rollers
• Overhung machine stand (requires scissor lift table)
• Scissor lift table
• Table size to your specification
• Extended machine opening
• Motorised table height adjustment
• Revolving table
• Extra table frame with workpiece handling for boxes
• Racking system to carry extra tables
• Automatic (plc) tooling
• Automatic (plc) table movement linked to tooling
• Automatic belt lubrication system
• Vacuum clamping

• Working width of 3000mm
• For spot weld and seam weld dressing
• For repair grinding bulky fabrications
• For flat and angled surfaces
• For up to 1.5 tonnes capacity (or more!)
• Twin grinding belts
• 4Kw grinding belt drive
• Electronic brake
• Motorised X-axis 1500mm
• Motorised grinding aggregate tilt 0° – 90°
• Grinding aggregate stroke 3000mm
• Scissor lift X-axis 1000mm
• Scissor lift Y-axis 2000mm
• Scissor lift rails 3000mm
• Scissor lift lateral displacement 800mm
• 1500Kg capacity

• Suspended, self-levelling contact roller
• Automatic tooling
• PLC control
• CNC control
• Rotating table

• Working widths of 2000, 3000 or 4000mm
• For spot weld and seam weld dressing
• For repair grinding bulky fabrications
• For flat and angled surfaces
• For up to 1.5 tonnes capacity (or more!)
• 4Kw grinding belt drive
• Variable grinding belt speed 5-26 m/s
• Clockwise or Anti-clockwise running
• Electronic brake
• Motorised X-axis on grinding aggregate 1000mm
• Motorised Y-axis on grinding aggregate 500mm
• Motorised grinding aggregate tilt 0°-90°
• Grinding aggregate stroke 2000mm (PBM2), 3000mm (PBM3) or 4000mm (PBM4)
• Scissor lift X-axis 1000mm
• Scissor lift Y-axis displacement 2000mm
• Scissor lift rails 3000mm
• Scissor lift lateral displacement 800mm
• 1500Kg capacity
• Twin dust extraction hoods

• Suspended, self-levelling contact roller
• Automatic tooling
• PLC control
• CNC control
• Rotating table
• 3500Kg capacity scissor lift
• Scissor lift drive
• Automatic tool drive
• Plc for single cycle program
• Siemens S7 plc for multiple cycle programs
• Extended axes

• 7.5Kw grinding belt drive
• Very high speed grinding belt (32m/s)
• Belt oscillation
• 120mm x 2300mm grinding belt for wide oscillation, cooling and long life
• Electronic brake
• 40 – 80 cm3 / min removal rate depending on steel quality
• 4 mins to process 50 parts of 50mm x 70mm x 20mm with a 23° bevel along the 50mm face.
• 0° to 60° bevel
• Variable grinding traverse speed 0.5-5m/min (reverse traverse 10m/min)
• 3-80mm material thickness
• Segmented clamp with 19 sections of 150mm width
• 50-2600mm component length
• 70mm minimum component width
• No burning or oxidisation of formed edges
• Consistent
• No regrinding
• Frees-up cutting-table space
• No material hardening
• Symmetrical joint production
• Visually clean, tidy faces
• Very high production rate (up to 8m/min per edge)
• Low noise
• Interrupted Edges
• Clean
• Straight edge!

• Motorised axes
• Electronic position readout
• Control by plc

• No burning or oxidisation of formed edges
• Consistent
• No regrinding
• Frees-up cutting-table space
• No material hardening
• Symmetrical joint production
• Visually clean, tidy faces
• Very high production rate (up to 8m/min per edge)
• Low noise
• Interrupted edges
• Clean
• Straight edge!
• Quick set up
• 5.5Kw grinding belt drive
• Very high speed grinding belt (32m/s)
• Belt oscillation
• 120mm x 2300mm grinding belt for wide oscillation, cooling and long life
• Electronic brake
• Up to 60 cm3/min removal rate depending on steel quality
• 0° to 60° bevel
• Variable feed speed 0.5-5m/min
• 3-50mm material thickness
• Horizontal guide rolls
• Vertical clamping rolls

• Extended infeed and outfeed tables
• Motorised axes adjustment
• Electronic position readout
• Removable guides for narrow work
• Extended table width for large workpieces

• Belt oscillation
• 120mm x 2300mm grinding belt for wide oscillation, cooling and long life
• Electronic brake
• 0° to 60° bevel
• Variable grinding traverse speed 0.5-5m/min (reverse traverse 10m/min)
• 3-80mm material thickness
• Segmented clamp with 19 sections of 150mm width
• 3-80mm component thickness
• 50-2600mm component length
• 70mm minimum component width
• No burning or oxidisation of formed edges
• Consistent
• No regrinding
• Frees-up cutting-table space
• No material hardening
• Symmetrical joint production
• Visually clean, tidy faces
• Very high production rate (up to 8m/min per edge)
• Low noise
• Interrupted Edges
• Clean
• Straight edge!
• Quick set up (plc optional)

• Motorised axes
• Electronic position readout
• Control by plc

• No burning or oxidisation of formed edges
• Consistent
• No regrinding
• Frees-up cutting-table space
• No material hardening
• Symmetrical joint production
• Visually clean, tidy faces
• Very high production rate (up to 8m/min per edge)
• Low noise
• Interrupted Edges
• Clean
• Straight edge!
• Quick set up
• 15Kw grinding belt drive
• Very high speed grinding belt (32 m/s)
• 120mm x 2500mm grinding belt for wide oscillation, cooling and long life
• Belt oscillation
• Electronic brake
• 60 – 120cm3 / min removal rate depending on steel quality
• -30° /+ 65° bevel angle
• Variable grinding traverse speed 0.5-5m/min (reverse traverse 10m/min)
• 3-100mm material thickness
• 80mm minimum component width
• 3m, 6m, 9m, 12m (and longer) bed length Optional
• 5 axis, plc control (999 programs)
• Keyboard and/or “teach-in” programming

• Twin grinding action: Contact Roller + Pad
• Electro-pneumatic grinding control
• Selective, localised grinding
• Automatic detection of welds by laser or
• Control by plc
• To take fabrications up to 1350 x 3000mm
• One or two abrasive belt heads
• Pneumatic, hydraulic and magnetic clamping actions
• To process butt welded fabrications and mitred joints
• For spot processing protruding surface welds
• For fabrications up to 1350 x 3000mm
• One or two simultaneous grinding operations.

• Automatic laser detection of welds

• Two speed main grinding belt drive (2.6/3.2Kw)
• High grinding belt speeds (12/24 m/s)
• Pneumatic belt tension
• Electro-pneumatically controlled pressure pad
• Hydraulic vertical drive
• Hydraulic swivel drive
• Hydraulic belt oscillation
• Variable belt head swivel 0° – 90°
• Single belt machine for seam welds up to 1600mm long
• Twin belt machine to take components 300-2200mm wide
• Four belt machine for lids and small boxes in a production line
• Control by plc
• To process welded corners up to 1550mm long
• To process one, two or four corners simultaneously
• Radiussed, chamfered or shaped grinding
• For consistent, straight dressed welds
• For lids, cabinets, enclosures, battery trays and safes

• Retractable positioning stop dogs
• Electro-magnetic clamping
• Vacuum clamping

• Single and Multiple abrasive belt &/or brush aggregates
• Centralised control panel
• Transport chain with Rubber Coated supports
• Tiltable and Rotatable Head 0-90°
• Variable abrasive belt speed 12-30m/sec
• Variable table travel speed 0.8-4m/min
• Contact Roller or Platen Shoe
• Abrasive belt oscillation

• Single and Multiple abrasive belt &/or brush aggregates
• Centralised control panel
• Transport chain with Rubber Coated supports
• Tiltable and Rotatable Head 0-90°
• Variable abrasive belt speed 12-30m/sec
• Variable table travel speed 0.8-4m/min
• Contact Roller or Platen Shoe
• Abrasive belt oscillation

• Edge deburring of guillotined sheet
• Continuous operation
• Constant pressure consumables for wear compensation
• Deburring operation at right-angles to material flow
• Simultaneous top and bottom operation
• Two machines in sequence with automatic handling for all four edges

• To process flat or profiled edges
• To process seam welds on square or rolled tube
• For components up to 2700mm long
• Up to 3 abrasive belt heads for grinding
• Nylon-web brush head for blending
• Up to 135° of positioning swing per head
• Control by plc

• Throughfeed grinding
• Wet working
• Stainless Steel construction
• 200 & 300mm operating widths
• Up to 4 Abrasive belt heads
• Coated abrasives and/or nylon web belts
• Two speed conveyor 5 and 10m/min
• Integral coolant recirculation pump
• Integral automatic papre gravity filter
• Outfeed blower / dryer

• Magnetic table
• Variable speed conveyor
• Electrical control of primary functions
• Electronic display of machine functions
• Conveyor cleaning brushes
• Pneumatic abrasive belt tensioning
• Pneumatic belt tracking

• Throughfeed grinding and/or cylinder brushing
• Oscillating cup brush heads
• 300 & 650mm operating width
• Up to 6 heads in any combination of belts and/or cylinder/cup brushes
• Two speed conveyor 5 and 10m/min

• Magnetic table
• Variable speed conveyor
• Electrical control of primary functions
• Electronic display of machine functions
• Conveyor cleaning brushes
• Pneumatic abrasive belt tensioning
• Pneumatic belt tracking

• Throughfeed grinding and brushing machines
• Top and/or bottom working
• 200, 300 and 650mm working widths
• Roller, Platen or Brush heads
• Up to 6 heads in any combination of belts and/or brushes
• Wet or dry formats
• Two speed conveyor 5 & 10 m/min
• Belt oscillation (optional on 200mm)

• Magnetic table
• Variable speed conveyor (3-15 m/min)
• Electrical control of primary functions
• Electronic display of machine functions
• Conveyor cleaning brushes
• Pneumatic belt tensioning
• Pneumatic belt tracking

• Throughfeed Graining / Deburring / Brushing Machine
• 150mm & 200mm Working Widths
• Roller or Brush Heads
• Up to 4 heads in various combinations
• Two Speed Conveyor 5&10 m/min
• Fixed table height/adjustable head height

• Magnetic table
• Variable speed conveyor (3-15 m/min)
• Wet operation with Stainless steel cladding and paper filter
• Electrical control of primary functions
• Electronic display of machine settings
• Pneumatic belt tension
• Pneumatic belt oscillation
• Pneumatic floating heads

• Abrasive Belt Aggregate:
• Auto-Motor Start / Stop
• 3kW – 20m/s
• 75 x 1900mm Abrasive Belt
• Polishing / Brushing Aggregate:
• Auto-Motor Start / Stop
• 4kW
• Mop / Brush Variation 300-180mm Ø
• Adjustable attack angle 0-15°
• Variable Height main Table:
• 0-600mm Opening
• 850 x 2500mm Table Area

• Motorised Table Height Adjustment
• Larger Table 850 x 3420mm
• 3rd Head
• Different Combinations of Abrasive belt & Mop / Brush Heads

• 200, 300 and 650mm Working Widths
• 3,4 and 7.5 kW Main Motor
• Tiltable Table 0 – 45°
• Abrasive Belt Oscillation and Automatic Tracking

• Tiltable worktable
• Wheel end tables
• 100 or 120 and 250mm Ø wheels
• 4 HP main motor
• 200 x 3200mm abrasive belt
• Tiltable belt aggregate

• Rubber coated wheels
• Bespoke machine, wheel and table sizes
• Abrasive belt oscillation

• 850 x 2500mm table
• 5.5 HP main motor
• 150 x 7150mm abrasive belt
• 0-600mm opening

• Powered table raise & lower
• Bespoke machine and table sizes
• Variable speed grinding belt

• 850-1300 (300-1500) rpm, 1.5 (2.2-3) Kw main motor
• 2 x 30 (35) Ø x 200mm mandrels
• To take 350 Ø x 100 or 200mm brush or
• Pneumatic drum, sizes 60, 76, 101, 152 or 203 Ø 200mm
• Or Abrasive belt
• Or Abrasive disc

• Spindle pitch -10° to +45°
• 1500rpm, 1.5Kw main motor
• 30 or 50 Ø x 200mm mandrel
• 1000 x 600mm table