|
 |
Published Editorial Cascade Deburring Improves Productivity At Rotary Power
Founded 30 years ago Newcastle-based Rotary Power, part of the British Engines Ltd (BEL) group, is a market-leading manufacturer of hydraulic pumps and motors equipment. Its wide range of products is aimed at a diverse group of demanding applications and includes pumps and motors with up to 125 cm3 displacement for the chemical and processing industries through to hydraulic motors used in heavy industry with capacities up to 16,000 cm3 displacement.
For Rotary Power, the quality of the finished item is paramount and the removal of burrs and other sharp edges is seen as vitally important to the manufacturing process. The traditional method of removing these features was to hand-fettle, which is both time consuming and inconsistent.
"Due to the nature of some of our castings and the complexity of the cast cavities it could take up to 45 minutes to deburr one component," says Steve Holt, Rotary Power's Production Manager, "We also ran the risk of damaging components and, worse still, scrapping a part and losing all the value added up to that point."
This situation was compounded in recent years by the increased volumes and the greater complexity that was being designed into the pumps and motors. A solution had to be found and after numerous options were investigated, including water and chemical deburring methods, Christchurch, Dorset-based Ellesco provided the answer to the problem.
As the UK agent for Iowa Engineered Processes Corp. (IEPC), Ellesco proposed the use of its Cascade method of deburring. This patented Cascade process combines a controlled flow of media, liquid cleaning compound and high frequency oscillations to produce a mix of burnishing, peening and shearing actions to deburr components.
The media, usually case hardened steel balls or pins, flows through and around the component(s) while being vibrated at a frequency between 2300 and 2900 cycles per minute, at an amplitude of between 4.75 and 6.35 mm. This action creates peak accelerations of 40g and the result is a smooth finish, free of any burrs. The machine installed at rotary power is the 1300 model, which can deburr large components weighing up to 0.6 tonne inclusive of fixture and media.
"During the evaluation process it became immediately apparent that this was the right process for us," confirms Steve Holt. "The machine has had an immediate impact on our business with productivity increasing dramatically and the previous bottleneck, caused by manual deburring, has disappeared completely. Quality has also benefited, with not one part being rejected since the machine was installed. We are now confident to issue parts from the Cascade machine directly to assembly."
Throughout the evaluation process the key issues were quality and consistency, the dramatic reduction in cycle times being an added bonus. The previous 45 minutes required to hand deburr has now been reduced to between 10 and 12 minutes, which includes the integral washing process and load and unload; although cycle times can be as low as five minutes, depending on component and process requirements. A further benefit, that also improves component throughput, is the fact that multiple components can be loaded to the simple, fabricated, fixtures.
Initially developed for high volume applications, the Cascade system has proved itself ideally suited to the medium volumes encountered at Rotary Power. This is due in part to the simplicity of the set-up and programming of the machine. Components are mounted on fixtures, a process that can be manual or automated with robots, This fixture is then enclosed and the cycle commences with the deburring media being released and the oscillations set for a pre-determined time cycle. A plc unit controls all of this and individual elements, such as deburring, washing, and vibration frequency, are easily controlled and pre-programmed. Standard method sheets with photographic memory aids are also used at Rotary Power to make setting both quicker and easier.
The result is a process that provides repeatable and predictable cycle times, irrespective of the loading of the machine, while at the same time eliminating part-to-part contact and, unlike other processes, it is ideal for large, heavy and low-value components.
A typical component from Rotary Power before (right) and after the Cascade process, highlighting the overall improvement in surface quality, inside and out.
Two working widths are available, 900 and 1350mm. The machine will accept components up to 70mm thick and down to delicate items such as plastic films and printed circuit boards.
Thousands of case-hardened steel balls 'Cascade' through the oscillating component, creating burnishing, peening and shearing actions to remove all burrs and improve external and internal surface quality.
The scale of the Cascade 1300 machine installed at Rotary Power makes it ideal for medium to high volume loads of up to 0.6 tonne.
Editor's notes:
Rotary Power is a member of the Newcastle-based British Engines Ltd (BEL) Group. Specialising in the manufacture of high quality hydraulic equipment for use in a wide range of applications, the 120-employee company generates turnover in the region of £10 million per year and has subsidiary companies in the USA and Germany.
The company's products include open circuit heavy-duty, fixed and variable, axial piston pumps and motors with capacities from 11.5 to 125 cm3/rev and the C-range of axial piston pumps for high-accuracy fluid metering with precision metering controls. While its XL motors are of radial piston-cam configuration and provide the efficiencies and pressure capabilities typical of HTLS motor design, while the SMA radial piston/eccentric motor range, with hydrostatically balanced rotating assembly, is designed to satisfy the heaviest duty application.
Ellesco is now in its fourth decade of business and rightly claims to be the UK's leading supplier of large finishing and deburring machines. Founded in 1975, principally to market the Timesavers / Grindingmaster range of abrasive belt and brush machines, the company has, along the way, attracted other manufacturers to its exclusive portfolio, all market leaders in their own fields: Autopulit, Kuhlmeyer and VG
The vast experience of deburring and surface finishing that the company has gained over this period is being put to good use in a diverse range of industries and virtually any deburring and surface finish application can be catered for.
// back...
|
|
|
