|
 |
Metal Machines - Timesavers/Grindingmaster 2xxx Bespoke specification, dry/wet working
|
Industrial 20 & 21 Series - Bespoke Configurations
- For deburring punched, nibbled, sheared or laser-cut sheet metal parts.
- For calibrating or keying carbon, rubber, wood or other soft materials.
- For grain finishing any material.
- Centralised operator control panel.
- 600, 900, 1100, 1350mm working widths
- Wide belt head with fine adjustments of contact roll, Ø 180mm.
- Conveyor bed on 4 heavy duty precision spindles, each 2 tons capacity.
- Ridged, precision made, rubber coated, workpiece hold down rolls.
- Motorised, single point thickness setting.
- Electronic digital thickness read-out.
- Frequency controlled feed motor with conveyor reverse for set-up.
Optional
- Orbital action abrasive pads
- Brush head with fine adjustment (Brush Ø 200mm) with fast brush oscillation:
- Steel wire brush (60 strokes/min.)
- Nylon web brush (60 or 120 strokes/min)
- Quick exchange brush slide complete with shaft and bearings.
- Two speed or Variable speed grinding motors.
- Fixed/floating conveyor table
- Constant pass line.
- Component cleaning brush.
- Reverse feed cycles with retractable heads.
- Stand-alone (in lieu of standard) parts dryer for wet-working machinery.
- Extended opening to 250mm.
- Vacuum table.
Dry working machines include:
- Dust extraction funnel(s)
- Motors enclosed within machine frame
Wet working machines include:
- Automatic coolant filtration system.
- Integral parts dryer (minimum component length 80mm).
- 3 sets of squeeze rolls.
- 2 sets of air knives.
- Noise insulated blower.
- Non-stainless machine components treated with rust preventative coatings.
- Quick exchange spray nozzle pipes for ease of maintenance.
- Centralised lubrication for high speed bearings.
- Each brush head includes a stainless steel wire brush, optionally, nylon web.
|
|
|
|
|
|
|
