|
 |
Metal Machines - Timesavers/Grindingmaster 6xxx Sheet / Plate Finishing
|
Grindingmaster 61 & 62 Series - For 24 hour / 7 day use
- Available in 900, 1350, 1600 and 2150mm working widths
- Single or Multiple Abrasive Belt or Brush heads.
- Wet or Dry Optional
- Centralised operator control panel.
- Wide belt head with fine adjustments of contact roll, Ø 280 & 180mm.
- Brush head with fine adjustment (Brush Ø 200mm).
- Brushing Machines with Very High Oscillation Rates (700 strokes/min)
- Quick exchange brush slide complete with shaft and bearings.
- Conveyor bed on 4 heavy duty precision spindles, each 2 tons capacity.
- Ridged, precision made, rubber coated, workpiece hold down rolls.
- Motorised, single point thickness setting.
- Electronic digital thickness read-out.
- Frequency controlled feed motor with conveyor reverse for set-up.
Optional
- Pre-programmable execution settings for part thickness, abrasive belt head depth and brush head depth.
- Multiple reciprocating cycles with pre-programmable stock removal and number of cycles
- Fixed/floating conveyor table
- Constant pass line.
- Component cleaning brush.
- Reverse feed cycles with retractable heads.
- Stand-alone parts dryer for wet-working machinery.
- Heavier main motors.
- Variable speed main motors
- Magnetic conveyor table
- Vacuum conveyor table
- Digital feed speed readout
Dry working machines include:
- Dust extraction funnel(s).
- Enclosed heads and motors for minimising noise levels.
Wet working machines include:
- Automatic coolant filtration system.
- Integral parts dryer
- 3 sets of squeeze rolls.
- 2 sets of air knives.
- Noise insulated blower.
- Non-stainless machine components treated with rust preventative coatings.
- Quick exchange spray nozzle pipes for ease of maintenance.
- Centralised lubrication for high speed bearings.
- Each brush head includes a stainless steelwire brush, optionally, nylon web.
|
|
|
|
|
|
|
